Is your battery dead on your fire safe? Replacing the AA Batteries on your SentrySafe electronic safe is quite easy. This step by step guide will show you exactly how to replace the batteries, located under the electronic lock in a holding tray.
Our blog followers have told us that these batteries should last at least 9 months.
We recommend that you change them every six months.
Make sure that the handle of your safe is in the UP position, this means the horizontal position.
Insert a paper clip or pen point into the small hole of the battery cover. This small hole is located directly below the electronic keypad. Simply push in with your paper clip or pen point while simultaneously sliding the battery cover to the right.
Simply disconnect and remove the battery holder and insert four (4) brand new AA Batteries. Sentry does not include batteries with your new purchase, we recommend Duracell as they offer the longest charge.
Now, reconnect the battery holder and simply install it back into the proper position and slide the AA battery cover back in place.
ELECTRONIC LOCK NOTE: There is a yellow LED that will light up when the batteries need replacement.
Problem: My safe won’t open
Solution: If the electronic lock is not operating, the first step is to simply replace the batteries located behind the battery cover.
Note: If your electronic lock is functioning and you cannot get into the safe, consult the owners manual.
Subscribe to our RSS feed and keep tabs on how to change batteries in electronic safes for all brand name manufacturers! See our last post about the GunVault Biometric Safe
Product names, logos, brands, and other trademarks featured or referred to within bestbatterytips .com website are the property of their respective trademark holders.